Oculink 8X Female PCIe PCI-Express SFF-8612 to MCIO Male 8x Mini Cool Edge IO SFF-TA-1016 SSD eGPU Data PCBA Adapter

This OCuLink 8x female to MCIO 8x male adapter can be used to connect internal devices, e.g. a backplane with MCIO connector to a controller with OCuLink SFF-8612/SFF-8611 connector.

Also can work for a backplane with SFF-8612/SFF-8611 socket to a controller with MCIO 8x socket.

OCuLink SFF-8612 female to MCIO male; Lock to Mating Part without Latch.

High-speed data transfer: The adapter is designed for use with SSD/GPU that use MCIO 8x connectors, allowing for fast and reliable data transfer at speeds of up to 64Gbps.

Easy to use: Simply plug in the SFF-8612 8x end of the adapter into your host cable and the MCIO 8x 74pin end into your external GPU or drive, and you're ready to go.

It can be connected e.g. one SSD or eGPU Graphics Card by using an optional cable. Suitable for small hosts, desktops, laptops, etc. to convert PCIE SFF-8612 sockets to MCIO 8X sockets, with fixing holes for fixing.

It transmits PCI Express 4.0/5.0 signals using the PCIE protocol; Support PCIE 4.0/5.0 data transmission, Data transfer rate up to 64Gbps, Support connecting GPU graphics card, SSD, expansion card, etc., backward compatible with PCIE 3.0.

Transform your works with this adapter, facilitating integration of PCI-E SFF-8611/8612 into systems requiring MCIO connection;Elevates your system's capabilities with our adapter, ensuring a stable and robusts connection investments without compromising on space or convenience.

Mini SAS SFF-8087 to Slimline SAS SFF-8654 Data Hard Disk Raid Cable for Server Data Center

Mini-SAS cable configurations; It is an internal Slimline SAS x4 (SFF-8654) to Mini Serial Attached SCSI x4 (SFF-8087) cable; It is used for connecting a SAS/SATA adapter to a SAS/SATA backplane.

Using SFF-8087 Mini SAS connectors, they support SAS 2.0/3.0/4.0 data rates up to 6 Gb/s with stable signal performance. These assemblies are ideal for backplane connections, JBOD integration, and internal SATA or SAS drive routing in data-center environments.

SFF-8654 is the official Small Form Factor (SFF) committee designation for the SlimSAS interface. It defines the physical, electrical, and mechanical requirements for SlimSAS 4i connectors—making it the backbone for next-generation internal high-speed cabling.

These Connectors will be used on the SAS 3.0/4.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gb/s.

internal HD Mini-SAS Copper Cables;Internal Mini SAS SFF-8087 to Slimline SAS SFF-8654 data Cable.

If you’re building or upgrading storage infrastructure that requires top-tier performance in tight spaces—think data centers, hyperconverged systems, or dense GPU nodes—SFF-8654 SlimSAS is the connector you want in your toolkit.

PCIE5.0 PCI-Express 16x to VROC Dual MCIO 8x Mini Cool Edge IO SFF-TA-1016 Virtual Raid Adapter for Mainboard SSD Graphics Card

One detachable PCIE PCI-Express 16x motherboard can be connected,The converter can be installed into the system internally through the MCIO interface.

Only supports motherboards with detachable PCI-E channels.Control the operation of two disks based on the motherboard PCIE channel,The motherboard without PCIE signal split can only recognize one disk.

Oculink 8X Female PCIe PCI-Express SFF-8612 to SFF-8654 Male 8x Slimline SSD Data PCBA Adapter

This OCuLink 8x female to SFF-8654 8x male adapter can be used to connect internal devices, e.g. a backplane with SFF-8654 connector to a controller with OCuLink SFF-8612/SFF-8611 connector.

Also can work for a backplane with SFF-8612/SFF-8611 socket to a controller with SFF-8654 8x socket.

OCuLink SFF-8612 female to SFF-8654 male; Lock to Mating Part without Latch.

High-speed data transfer: The adapter is designed for use with SSD/GPU that use SFF-8654 8x connectors, allowing for fast and reliable data transfer at speeds of up to 64Gbps.

Easy to use: Simply plug in the SFF-8612 8x end of the adapter into your host cable and the SFF-8654 8x 74pin end into your external GPU or drive, and you're ready to go.

It can be connected e.g. one SSD or eGPU Graphics Card by using an optional cable. Suitable for small hosts, desktops, laptops, etc. to convert PCIE SFF-8612 sockets to SFF-8654 8X sockets, with fixing holes for fixing.

It transmits PCI Express 4.0/5.0 signals using the PCIE protocol; Support PCIE 4.0/5.0 data transmission, Data transfer rate up to 64Gbps, Support connecting GPU graphics card, SSD, expansion card, etc., backward compatible with PCIE 3.0.

Transform your works with this adapter, facilitating integration of PCI-E SFF-8611/8612 into systems requiring SFF-8654 connection;Elevates your system's capabilities with our adapter, ensuring a stable and robusts connection investments without compromising on space or convenience.

Dual MCIO 8X Mini Cool Edge IO SFF-TA-1016 to PCIE5.0 PCI-Express 16X VROC Adapter for Mainboard Graphics Card

One detachable PCIE PCI-Express 8x motherboard can be connected,The converter can be installed into the system internally through the MCIO interface; Only supports motherboards with detachable PCI-E channels; Control the operation of two disks based on the motherboard PCIE channel,The motherboard without PCIE signal split can only recognize one disk.

OCuLink PCIe PCI-Express SFF-8611 4i to OCuLink SFF-8611 Data Active Cable for SSD eGPU External Graphics Card Dock

This OCuLink cable can be used to connect internal devices, e.g. a backplane with OCuLink SFF-8611 connector to a controller with OCuLink SFF-8611 connector.

SFF-8611 Oculink 4x connectors are internal and external small form factor PCI-E connectors optimized for the client and market. Compatible with T10/ SAS-4 24 Gbps, SFF-8611, SFF-8612, PCIe Gen 3 and Gen 4,Gen 5;

The cable transmits PCI Express 4.0/5.0 signals using the NVMe protocol.Data transfer rate up to 64Gbps, This makes it suitable for use with the pci-e4.0/5.0 generation of high-performance SSDs and other PCIe Gen4 devices; Support connecting GPU graphics card, SSD, expansion card, etc., backward compatible with PCIE 3.0.

Transform your works with this cable, facilitating integration of it into systems requiring OCuLink connection;Elevates your system's capabilities with our cable, ensuring a stable and robusts connection investments without compromising on space or convenience.

Lock to Mating Part: With Active Latch,

System requirements:A free OCuLink interface

Length 20cm,50cm,100cm.

Dual Slimline 8X SFF-8654 74Pin VROC to PCIE PCI-Express 16x Adapter with ATX 24Pin Power Switch Port for Mainboard Graphics Card

One detachable PCIE PCI-Express 8x motherboard can be connected,The converter can be installed into the system internally through the SFF-8654 8X interface.

Only supports motherboards with detachable PCI-E channels.Control the operation of two disks based on the motherboard PCIE channel,The motherboard without PCIE signal split can only recognize one disk.

High-speed data transfer : The adapter is designed for use with PCI-E that use SFF-8654 8x connectors, allowing for fast and reliable data transfer at speeds of up to 32Gbps.

Easy to use: Simply plug in the SFF-8654 8x 74Pin end of the adapter into your device and the PCI-E 16X socket end into your external pci-e device, and you're ready to go.

It can be connected e.g. one SSD or eGPU Graphics Card by using an optional cable. Suitable for small hosts, desktops, laptops, etc. to convert PCIE sockets to SFF-8654 8X sockets, with fixing holes for fixing.

It transmits PCI Express 4.0/5.0 signals using the PCIE protocol; Support PCIE 4.0/5.0 data transmission, Support connecting GPU graphics card, SSD, expansion card, etc., backward compatible with PCIE 3.0.

Transform your works with this cable adapter, facilitating integration of PCI-E into systems requiring SFF-8654 connection; Elevates your system's capabilities with our adapter, ensuring a stable and robusts connection investments without compromising on space or convenience.

The PCI-E 6Pin power port support 12V power. Please connect the extral power for your PCI-E card if the power is insufficient. (The switch is for PCI-E power)

Slimline 8X SFF-8654 74Pin to PCIE PCI-Express 16x Adapter with PCI-E 6Pin Power Switch Port for Mainboard Graphics Card

High-speed data transfer : The adapter is designed for use with PCI-E that use SFF-8654 8x connectors, allowing for fast and reliable data transfer at speeds of up to 32Gbps.

Easy to use: Simply plug in the SFF-8654 8x 74Pin end of the adapter into your device and the PCI-E 16X socket end into your external pci-e device, and you're ready to go.

It can be connected e.g. one SSD or eGPU Graphics Card by using an optional cable. Suitable for small hosts, desktops, laptops, etc. to convert PCIE sockets to SFF-8654 8X sockets, with fixing holes for fixing.

It transmits PCI Express 4.0/5.0 signals using the PCIE protocol; Support PCIE 4.0/5.0 data transmission, Support connecting GPU graphics card, SSD, expansion card, etc., backward compatible with PCIE 3.0.

Transform your works with this cable adapter, facilitating integration of PCI-E into systems requiring SFF-8654 connection; Elevates your system's capabilities with our adapter, ensuring a stable and robusts connection investments without compromising on space or convenience.

The PCI-E 6Pin power port support 12V power. Please connect the extral power for your PCI-E card if the power is insufficient. (The switch is for PCI-E power)

2280 PCI-E5.0 4.0 M.2 M-key NVME to Oculink SFF-8612 SFF-8611 & SSD Host Adapter with for NUC15 Pro Mini PC Computer Tall Type NUC15CRH

Only work for NUC15 Pro Mini PC Computer Tall Type NUC15CRH, Package included oculink adapter and SSD adapter.

This SSD convertor expands the 2242 M-Key system by one NVME 2280 interface. It can be connected e.g. one extra SSD for 2280, Then the orinigal 2280 slot can connector the oculink adapter.

This oculink convertor expands the 2280 M-Key system by one SFF-8612 oculink interface. It can be connected e.g. one SSD or eGPU Graphics Card by using an optional cable.

The card transmits PCI Express 5.0/4.0 signals using the NVMe protocol.Data transfer rate up to 64Gbps, Supports NVM Express (NVMe) 1.2. This makes it suitable for use with the pci-e4.0 generation of high-performance SSDs and other PCIe Gen5/Gen4 devices.

Oculink 4x connectors are internal and external small form factor PCI-E connectors optimized for the client and market. Compatible with T10/ SAS-4 24 Gbps, SFF-8611, SFF-8612, PCIe Gen 3 and Gen 4,Gen 5;

Build in PX410 PCI-Express Linear Redriver is a four-channel, low-power, high-performance linear repeater/redriver designed to support PCI Express (PCIe) Generation 1.0, 2.0, 3.0, 4.0 and 5.0. The device is a protocol-agnostic linear redriver that can operate for interfaces up to 25Gbps.

2280 PCI-E 5.0 4.0 M.2 M-key NVME to Oculink SFF-8612 SFF-8611 & SSD Host Adapter with for NUC15 Pro Mini PC Computer Slim Type NUC15CRK

Only work for NUC15 Pro Mini PC Computer Slim Type NUC15CRK, Package included oculink adapter and SSD adapter.

This SSD convertor expands the 2242 M-Key system by one NVME 2280 interface. It can be connected e.g. one extra SSD for 2280, Then the orinigal 2280 slot can connector the oculink adapter.

This oculink convertor expands the 2280 M-Key system by one SFF-8612 oculink interface. It can be connected e.g. one SSD or eGPU Graphics Card by using an optional cable.

The card transmits PCI Express 5.0/4.0 signals using the NVMe protocol.Data transfer rate up to 64Gbps, Supports NVM Express (NVMe) 1.2. This makes it suitable for use with the pci-e4.0 generation of high-performance SSDs and other PCIe Gen5/Gen4 devices.

Oculink 4x connectors are internal and external small form factor PCI-E connectors optimized for the client and market. Compatible with T10/ SAS-4 24 Gbps, SFF-8611, SFF-8612, PCIe Gen 3 and Gen 4,Gen 5;

Build in PX410 PCI-Express Linear Redriver is a four-channel, low-power, high-performance linear repeater/redriver designed to support PCI Express (PCIe) Generation 1.0, 2.0, 3.0, 4.0 and 5.0. The device is a protocol-agnostic linear redriver that can operate for interfaces up to 25Gbps.

Dual Oculink SFF-8612 SFF-8611 to M.2 NGFF M-Key NVME PCIe SSD 2280 22110mm Adapter for Mainboard

Oculink 4x connectors are internal and external small form factor PCI-E connectors and cables optimized for the client and market.

Hyper Kit Storage controller,Ultra PCI-E oculink interface (PCIe 4.0/5.0 x4),The card work for PCI-E NVME SSD.(Not work for SAS or Slimeline SAS HD)

This M.2 converter enables belowing applications: Dual M.2 NVME PCIe SSD in 2280, 2260, 2242 and 2230 format can be connected,The converter can be installed into the system internally through Dual SFF-8611/8612 oculink interface. and the SATA power is required.

The converter work for one oculink and one NVME, or Two oculink and two NVME.

This oculink M.2 converter can't convert NVME to SATA/SAS, also can't covert NGFF/SATA/SAS to Oculink.

Requirement: The motherboards with bifurcation detachable PCI-E channels; Please set it at BIOS.

SFF-8654 Cable Card U2 Kit NGFF M-Key to Slimline SAS NVME PCIe SSD SATA Adapter for Mainboard

The package included one cable and one card.

This adapter card simply combines SATA to NGFF and PCIe to NVMe SSDs onto one card, allowing the two SSDs to be used independently.

Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key B+M based on SATA or PCIe

Hyper Kit Storage controller,Ultra PCI-E Card (PCIe 3.0 x4),The card only work for PCI-E SSD.(Not work for SAS or Slimeline SAS HD)

This U.2 M.2 converter enables two different usage applications.

1. One M.2 PCIe SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5inch HDD. The converter can be installed into the system internally through the SFF-8654 Slimeline interface.

2. One M.2 SATA SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5inch HDD. The converter can be installed into the system internally through the SATA 22pin interface.

SFF-8654 to U2 Kit NGFF M-Key to Slimline SAS NVME PCIe SSD SATA Adapter for Mainboard

This adapter card simply combines SATA to NGFF and PCIe to NVMe SSDs onto one card, allowing the two SSDs to be used independently.

Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key B+M based on SATA or PCIe

Hyper Kit Storage controller,Ultra PCI-E Card (PCIe 3.0 x4),The card only work for PCI-E SSD.(Not work for SAS or Slimeline SAS HD)

This U.2 M.2 converter enables two different usage applications.

1. One M.2 PCIe SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5inch HDD. The converter can be installed into the system internally through the SFF-8654 Slimeline interface.

2. One M.2 SATA SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5inch HDD. The converter can be installed into the system internally through the SATA 22pin interface.

Oculink SFF-8612 8611 to U.2 Kit M-Key to NVME PCIe SSD and NGFF to SATA Adapter for Mainboard

This adapter card simply combines SATA to NGFF and PCIe to NVMe SSDs onto one card, allowing the two SSDs to be used independently.

Oculink 4x connectors are internal and external small form factor PCI-E connectors and cables optimized for the client and market.

Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key B+M based on SATA

The card not work for NVME M-key SSD to SATA host, Also can't work for NGFF B-key SSD to oculink host.

It only can work for NVME M-key SSD to oculink or NGFF B-key SD to SATA.

Hyper Kit Storage controller,Ultra PCI-E Card (PCIe 3.0 x4),The card work for PCI-E SSD.(Not work for SAS or Slimeline SAS HD)

This U.2 M.2 converter enables two different usage applications.

1. One M.2 PCIe SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5inch HDD. The converter can be installed into the system internally through the SFF-8611/8612 oculink interface.

2. One M.2 SATA SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5inch HDD. The converter can be installed into the system internally through the SATA 22pin interface.

3. It can't convert NVME to SATA, also can't covert NGFF/SATA to Oculink.

U.2 U2 SFF-8639 to Slimline SFF-8654 4i NVME PCIe SSD Cable for Mainboard SSD 750 p3600 p3700 M.2

Length:50cm

1) The High Speed system referenced as PCI-E 4.0 standard, meets the 64Gbps specification.The speed and other properties is not changed,only form conversion interface.Transparent to the operating system and does not require any software drivers.

2) Hyper Kit Storage controller cable,Ultra M.2 Card cable for Mainboard SSD 750 M.2 and PCI-E 4x;Support PCIe 5.0/4.0/3.0 x4.

3) This cable can be used to connect internal devices, e.g. a device with SFF-8639 connector to a controller with Slimline SFF-8654 4i connector.

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

5) The Cable only support PCI-E, not support SAS raid card. (Cable only, the adapter / card not included.)

Oculink SFF-8611 to U.2 U.3 SFF-8639 NVME PCIe PCI-Express SSD Cable for Mainboard SSD

1) The High Speed system referenced as PCI-E 4.0 standard, meets the 64Gbps specification.The speed and other properties is not changed,only form conversion interface.Transparent to the operating system and does not require any software drivers.

2) Hyper Kit Storage controller cable,Ultra M.2 Card cable for Mainboard SSD 750 M.2 and PCI-E 4x;Support PCIe 5.0/4.0/3.0 x4.

3) This cable can be used to connect internal devices, e.g. a device with SFF-8639 connector to a controller with Oculink SFF-8611 4i connector.

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

5) The Cable only support PCI-E, not support SAS raid card. (Cable only, the adapter / card not included.)

NGFF M-Key NVME to U.2 U2 Kit SFF-8639 to SFF-8654 Slimline SAS PCIe SSD Adapter for Mainboard

1) Industry standards: Support for SAS 3.0/4.0, PCIe Gen 3/4 means that you can trust that your equipment will perform at optimal levels without any signal loss or degradation.for Mainboard SSD 750 M.2 SFF-8654,Hyper Kit Storage controller,Ultra M.2 Card,4 GBps PCIe 4.0 x4.

2) Support the 22*30 mm/22*42 mm/22*60 mm/22*80 mm size of M.2 NGFF M-key socket.Ultra M.2 Card only. (The cable not include.)

3) This convertor expands the system by one SFF-8654 interface. It can be connected e.g. one SSD by using an optional cable.The card transmits PCI Express signals using the NVMe protocol.

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

5) Ultra-thin PCBA body, with its flat and foldable design ensures efficient data transmission. High quality PCB boards with high frequency, low resistance material, high TG board, and gold plated fingers ensure excellent electrical conductivity while reducing the risk of collapse or blue screen due to oxidation.

2280 PCI-E4.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Vertical Host Adapter for NVME U.2 SSD eGPU

This convertor expands the 2280 M-Key system by one SFF-8612 oculink interface. It can be connected e.g. one SSD or eGPU Graphics Card by using an optional cable.

The adapter features a built-in ReDriver circuit, which helps to boost signal quality and reduce noise interference over long cable lengths.

The card transmits PCI Express 4.0 signals using the NVMe protocol.Data transfer rate up to 64Gbps, Supports NVM Express (NVMe) 1.2. This makes it suitable for use with the pci-e4.0 generation of high-performance SSDs and other PCIe Gen4 devices.

Oculink 4x connectors are internal and external small form factor PCI-E connectors optimized for the client and market. Compatible with T10/ SAS-4 24 Gbps, SFF-8611, SFF-8612, PCIe Gen 3 and Gen 4.

PX410 PCI-Express Linear Redriver is a four-channel, low-power, high-performance linear repeater/redriver designed to support PCI Express (PCIe) Generation 1.0, 2.0, 3.0, and 4.0. The device is a protocol-agnostic linear redriver that can operate for interfaces up to 25Gbps.

Connectors: 1 x OCuLink SFF-8612 female and 1 x 67 pin M.2 Key M male.

SFF-8654 Slimline Female Host to U.2 U.3 SFF-8639 NVME PCIe PCI-Express SSD Adapter for Mainboard

This convertor expands the SFF-8639 U.2/U.3 by one SFF-8654 slimline interface. It can be connected e.g. one SSD by using an optional cable.

The card transmits PCI Express 4.0/5.0 signals using the NVMe protocol.

Connectors: 1 x slimline SFF-8654 female and 1 x SFF-8639 U.2/U.3 female and 1 x SATA power.

Data transfer rate up to 64Gbps, Supports NVM Express (NVMe) 1.2.

The speed and other properties is not changed,only form conversion interface.Transparent to the operating system and does not require any software drivers.

U.3 drives are still backward compatible with U.2, though—the U.3 drives determine which host type it is inserted into (by using different combinations of HPT0 and HTP1 being open or ground), and configure the data lanes on power-up. U.3 drives can still act as dual-port NVMe drives in supporting systems.

Oculink SFF-8612 SFF-8611 to M.2 NGFF M-Key to NVME PCIe SSD 2280 SSD PCBA Adapter for Mainboard

Oculink 4x connectors are internal and external small form factor PCI-E connectors optimized for the client and market. Compatible with T10/ SAS-4 24 Gbps, SFF-8611, SFF-8612, PCIe Gen 3 and Gen 4.

Hyper Kit Storage controller,Ultra PCI-E Card (PCIe 4.0 x4),The Enclosure work for PCI-E SSD.(Not work for SAS or Slimeline SAS HD).

The adapter transmits PCI Express 4.0 signals using the NVMe protocol; Support PCIE 4.0 data transmission, Data transfer rate up to 64Gbps, Supports NVM Express (NVMe) 1.2. support connecting GPU graphics card, SSD, expansion card, etc., backward compatible with PCIE 3.0.

This M.2 PCBA converter enables belowing applications. One M.2 NVME PCIe SSD in 22110, 2280, 2260, 2242 and 2230 format can be connected,The converter can be installed into the system internally through the SFF-8611/8612 oculink interface.

It can't convert NVME to SATA, also can't covert NGFF/SATA to Oculink.

Package include one PCBA.(oculink cable and SSD not include)

2280 NGFF PCI-E4.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Host Cable 30cm with Bracket for NVME U.2 SSD eGPU

This 30cm cable expands the 2280 M-Key system by one SFF-8612 oculink female interface.With 8cm low profile and 12cm standard bracket.

Oculink is the next generation of high-speed internal and external I/O connectors for servers, compatible with T10/ SAS-4 24 Gbps, SFF-8611, SFF-8612, PCIe Gen 3 and Gen 4.

It can be connected e.g. one SSD or eGPU Graphics Card by using an optional cable. Suitable for small hosts, desktops, laptops, etc. to convert M.2 sockets to Oculink sockets, with fixing holes for fixing.

The cable transmits PCI Express 4.0 signals using the NVMe protocol; Support PCIE 4.0 data transmission, Data transfer rate up to 64Gbps, Supports NVM Express (NVMe) 1.2. support connecting GPU graphics card, SSD, expansion card, etc., backward compatible with PCIE 3.0.

Transform your works with this cable adapter, facilitating integration of M.2 M Key into systems requiring OCuLink connection;Elevates your system's capabilities with our adapter, ensuring a stable and robusts connection investments without compromising on space or convenience.

Connectors: 1 x OCuLink SFF-8612 female and 1 x 67 pin M.2 Key M male.

PCIE5.0 PCI-Express 16x to Dual MCIO 8i Mini Cool Edge IO SFF-TA-1016 VROC Virtual RAID Adapter for Mainboard SSD Graphics Card

One detachable PCIE PCI-Express 8x motherboard can be connected,The converter can be installed into the system internally through the MCIO interface.

Only supports motherboards with detachable PCI-E channels.Control the operation of two disks based on the motherboard PCIE channel,The motherboard without PCIE signal split can only recognize one disk.

PCIE PCI-Express 16x to Dual Oculink SFF-8612 SFF-8611 8x VROC Adapter for Mainboard SSD Graphics Card

Oculink 8x connectors are internal and external small form factor PCI-E connectors and cables optimized for the client and market.

This oculink pci-e converter enables belowing applications.

One detachable PCIE PCI-Express 16x motherboard can be connected,The converter can be installed into the system internally through the SFF-8611/8612 oculink interface.

Only supports motherboards with detachable PCI-E channels.Control the operation of four disks based on the motherboard PCIE channel,The motherboard without PCIE signal split can only recognize one disk.

Dual MCIO 8i Mini Cool Edge IO SFF-TA-1016 to PCIE5.0 PCI-Express 16x VROC Adapter for Mainboard SSD Graphics Card

One detachable PCIE PCI-Express 8x motherboard can be connected,The converter can be installed into the system internally through the MCIO interface.

Only supports motherboards with detachable PCI-E channels.Control the operation of two disks based on the motherboard PCIE channel,The motherboard without PCIE signal split can only recognize one disk.

PCIE5.0 PCI-Express 8x to MCIO 8i Mini Cool Edge IO SFF-TA-1016 VROC Adapter for Mainboard SSD Graphics Card

One detachable PCIE PCI-Express 8x motherboard can be connected,The converter can be installed into the system internally through the MCIO interface.

Only supports motherboards with detachable PCI-E channels.Control the operation of two disks based on the motherboard PCIE channel,The motherboard without PCIE signal split can only recognize one disk.

Oculink SFF-8612 SFF-8611 to M.2 Kit NGFF M-Key to NVME PCIe SSD 2280 22110mm Adapter for Mainboard

Oculink 4x connectors are internal and external small form factor PCI-E connectors and cables optimized for the client and market.

Hyper Kit Storage controller,Ultra PCI-E Card (PCIe 4.0/5.0 x4),The card work for PCI-E SSD.(Not work for SAS or Slimeline SAS HD)

This U.2 M.2 converter enables belowing applications.

1. One M.2 NVME PCIe SSD in 22110, 2280, 2260, 2242 and 2230 format can be connected,The converter can be installed into the system internally through the SFF-8611/8612 oculink interface.

2. It can't convert NVME to SATA, also can't covert NGFF/SATA to Oculink.

PCI-E Ultraport Slimline SAS Slim 4.0 SFF-8654 8i 74pin to Dual SFF-8654 4i 38Pin Cable 40cm PCI-Express

This cable can be used to connect internal devices, e.g. a backplane with Slimline 8654 74pin connector to a controller with SFF-8654 4I 38pin connector. also work for 74pin host to dual 38pin target.

Ultraport Slimline 8i 74Pos Cable Assembly,Applications for Servers,Data Storage,Workstation;Meet PCIe Gen3 and SAS4.0 specification.

Length: 50cm

Connector 1: Slimline SFF-8654 8i 74pin

Connector 2: Dual SFF-8654 4i

Features and Benefits:

1.Smaller size connector and cable saves device space

2.Provide four channels signal transmission as per industry standard

3.Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel

4.Meet SAS4.0, Ultraport SlimSAS SFF-8654 specification

Slimline SAS 4.0 SFF-8654 8i 74pin Host Raid to 8 SATA 7pin Target Hard Disk Fanout Raid Cable 1-to-8

This slim SAS cable can be used to connect internal devices, e.g. a hard disk with SATA 7pin connector to a controller with Slim SAS SFF-8654 8i connector.

It can't work for SATA Host to SFF-8654 target. It is not reversible.

The cable only work for SFF-8654 8i SAS/SATA function card, Not work for SFF-8654 8i PCIE Card.

Ultraport SlimSAS 8i 74Pos Cable Assembly, Slim SAS 8i Straight to SATA 7pin; Applications for Servers,Data Storage,Workstation;Meet PCIe Gen3 and SAS4.0 specification.

Connector 1: Slimline SAS 8i 74pin

Connector 2: SATA 7pin

Features and Benefits:

1.Smaller size connector and cable saves device space

2.Provide four channels signal transmission as per industry standard

3.Data speed: 48Gbps for SAS and 8GT/s for PCIe per channel

4.Meet SAS4.0/3.0, Ultraport SlimSAS SFF-8654 specification

Slim Line SAS 4.0 SFF-8654 4i 38pin Host to 4 SATA 7pin Target Hard Disk Fanout Raid Cable 50cm

This SAS cable can be used to connect internal devices, e.g. a hard disk with SATA 7pin connector to a controller with Slim SAS SFF-8654 4i connector.

Ultraport SlimSAS 4i 38Pos Cable Assembly

Slim SAS 4i Straight to SATA 7pin

Length: 50cm

Connector 1: Slim SAS 4i 38pin

Connector 2: SATA 7pin

Applications for Servers,Data Storage,Workstation

meet PCIe Gen3 and SAS4.0 specification

Features and Benefits:

1.Smaller size connector and cable saves device space

2.Provide four channels signal transmission as per industry standard

3.Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel

4.Meet SAS3.0, Ultraport SlimSAS SFF-8654 specification

Slim Line SAS 4.0 SFF-8654 4i 38pin to HD Mini SAS 4i SFF-8643 36pin Cable

This SAS cable can be used to connect internal devices, e.g. a backplane with Mini SAS HD SFF-8643 connector to a controller with Slim SAS SFF-8654 4i connector.

Ultraport SlimSAS 4i 38Pos Cable Assembly

Slim SAS 4i Straight to HD Mini SAS 4i

Length: 50cm

Connector 1: Slim SAS 4i 38pin

Connector 2: HD Mini SAS 4i 36pin

Applications for Servers,Data Storage,Workstation

meet PCIe Gen3 and SAS4.0 specification

Features and Benefits:

1.Smaller size connector and cable saves device space

2.Provide four channels signal transmission as per industry standard

3.Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel

4.Meet SAS3.0, Ultraport SlimSAS SFF-8654, SFF-8643 specification

2280 NGFF PCI-E4.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Host Cable 15cm for NVME U.2 SSD eGPU

This 15cm cable expands the 2280 M-Key system by one SFF-8612 oculink female interface.

Oculink is the next generation of high-speed internal and external I/O connectors for servers, compatible with T10/ SAS-4 24 Gbps, SFF-8611, SFF-8612, PCIe Gen 3 and Gen 4.

It can be connected e.g. one SSD or eGPU Graphics Card by using an optional cable. Suitable for small hosts, desktops, laptops, etc. to convert M.2 sockets to Oculink sockets, with fixing holes for fixing.

The cable transmits PCI Express 4.0 signals using the NVMe protocol; Support PCIE 4.0 data transmission, Data transfer rate up to 64Gbps, Supports NVM Express (NVMe) 1.2. support connecting GPU graphics card, SSD, expansion card, etc., backward compatible with PCIE 3.0.

Transform your works with this cable adapter, facilitating integration of M.2 M Key into systems requiring OCuLink connection;Elevates your system's capabilities with our adapter, ensuring a stable and robusts connection investments without compromising on space or convenience.

Connectors: 1 x OCuLink SFF-8612 female and 1 x 67 pin M.2 Key M male.

2280 PCI-E4.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Vertical Host Adapter for NVME U.2 SSD eGPU

This convertor expands the 2280 M-Key system by one SFF-8612 oculink interface.

It can be connected e.g. one SSD or eGPU Graphics Card by using an optional cable.

The card transmits PCI Express 4.0 signals using the NVMe protocol.

Connectors: 1 x OCuLink SFF-8612 female and 1 x 67 pin M.2 Key M male.

Data transfer rate up to 64Gbps, Supports NVM Express (NVMe) 1.2.

PCI-E 3.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Host Adapter for ThinkBook 16+ Laptop External Graphics Card & SSD

This convertor only work for ThinkBook 16+ Laptop, Not work for 14+ and other laptop.

The convertor expands the system by one SFF-8612 interface.

It can be connected e.g. one SSD or Graphics Card by using an optional cable+power.

The card transmits PCI Express 4x signals using the NVMe protocol.


Specification:

Connectors:

1 x OCuLink SFF-8612 female

1 x 67 pin M.2 Key M male

Data transfer rate up to 32 Gbps

Supports NVM Express (NVMe) 1.2

PCI-E 4.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Host Adapter for ThinkBook 14+ Laptop External Graphics Card & SSD

This convertor only work for ThinkBook 14+ Laptop, Not work for 16+ and other laptop.

The convertor expands the system by one SFF-8612 interface.

It can be connected e.g. one SSD or Graphics Card by using an optional cable+power.

The card transmits PCI Express 4x signals using the NVMe protocol.


Specification:

Connectors:

1 x OCuLink SFF-8612 female

1 x 67 pin M.2 Key M male

Data transfer rate up to 32 Gbps

Supports NVM Express (NVMe) 1.2

PCI-E 4.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Host Adapter for 2024 ThinkBook 16+ AMD8845 External Graphics Card & SSD

This convertor only work for 2022-2023 ThinkBook 16+ AMD8845 CPU Laptop, Not work for 14+ and other laptop.

The convertor expands the system by one SFF-8612 interface.

It can be connected e.g. one SSD or Graphics Card by using an optional cable+power.

The card transmits PCI Express 4x signals using the NVMe protocol.


Specification:

Connectors:

1 x OCuLink SFF-8612 female

1 x 67 pin M.2 Key M male

Data transfer rate up to 32 Gbps

Supports NVM Express (NVMe) 1.2

PCI-E 4.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Host Adapter for 2024 ThinkBook 14+ AMD8845 External Graphics Card & SSD

This convertor only work for 2022-2023 ThinkBook 14+ AMD8845 CPU Laptop, Not work for 16+ and other laptop.

The convertor expands the system by one SFF-8612 interface.

It can be connected e.g. one SSD or Graphics Card by using an optional cable+power.

The card transmits PCI Express 4x signals using the NVMe protocol.


Specification:

Connectors:

1 x OCuLink SFF-8612 female

1 x 67 pin M.2 Key M male

Data transfer rate up to 32 Gbps

Supports NVM Express (NVMe) 1.2

PCI-E 4.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Host Adapter for 2022 2023 ThinkBook 14+ External Graphics Card & SSD

This convertor only work for 2022-2023 ThinkBook 14+ Laptop, Not work for 16+ and other laptop.

The convertor expands the system by one SFF-8612 interface.

It can be connected e.g. one SSD or Graphics Card by using an optional cable+power.

The card transmits PCI Express 4x signals using the NVMe protocol.


Specification:

Connectors:

1 x OCuLink SFF-8612 female

1 x 67 pin M.2 Key M male

Data transfer rate up to 32 Gbps

Supports NVM Express (NVMe) 1.2

Oculink SFF-8612 SFF-8611 to M.2 NGFF M-Key to NVME PCIe SSD 2280 SSD Enclosure Adapter for Mainboard

Oculink 4x connectors are internal and external small form factor PCI-E connectors and cables optimized for the client and market.

Hyper Kit Storage controller,Ultra PCI-E Card (PCIe 4.0 x4),The Enclosure work for PCI-E SSD.(Not work for SAS or Slimeline SAS HD)

This M.2 Enclosure converter enables belowing applications. One M.2 NVME PCIe SSD in 2280, 2260, 2242 and 2230 format can be connected,The converter can be installed into the system internally through the SFF-8611/8612 oculink interface.

It can't convert NVME to SATA, also can't covert NGFF/SATA to Oculink.

Package include one Enclosure, one oculink cable and one DC power cable.

Down Angled 90 Degree OcuLink PCIe 4.0 PCI-Express SFF-8611 4i to SFF-8611 Data Active Cable 80cm

This OCuLink cable can be used to connect internal devices, e.g. a backplane with OCuLink SFF-8611 connector to a controller with OCuLink SFF-8611 connector.

OCuLink SFF-8611 male to OCuLink SFF-8611 male, Cable length: 80cm.

Angled Design,The angled type Allowing you to connect it to a female port, even if space around the port is limited.

Lock to Mating Part With Active Latch,System requirements:A free OCuLink interface.

Data transfer rate up to 64Gbps, Transmits PCI Express 4.0 signals using the oculink protocol.

OCuLink is a peripheral connection standard that allows you to connect PCIe devices using an external cable.

It offers higher bandwidth, lower cost, and better performance for external graphics cards & SSD.

Left Angled 90 Degree OcuLink PCIe 4.0 PCI-Express SFF-8611 4i to SFF-8611 Data Active Cable 50cm

This OCuLink cable can be used to connect internal devices, e.g. a backplane with OCuLink SFF-8611 connector to a controller with OCuLink SFF-8611 connector.

OCuLink SFF-8611 male to OCuLink SFF-8611 male, Cable length 50cm.

Angled Design,The angled type Allowing you to connect it to a female port, even if space around the port is limited.

Lock to Mating Part With Active Latch,System requirements:A free OCuLink interface.

Data transfer rate up to 64Gbps, Transmits PCI Express 4.0 signals using the oculink protocol.

OCuLink is a peripheral connection standard that allows you to connect PCIe devices using an external cable.

It offers higher bandwidth, lower cost, and better performance for external graphics cards & SSD.

PCI-E 3.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Host Adapter for GPD WIN Max2 External Graphics Card & SSD

This convertor only work for GPD WIN Max2 Laptop, Maybe not work for other laptop.

The convertor expands the system by one SFF-8612 interface.

It can be connected e.g. one SSD or Graphics Card by using an optional cable+power.

The card transmits PCI Express 4x signals using the NVMe protocol.

Data transfer rate up to 32 Gbps,Supports NVM Express (NVMe) 1.2


Package included:

1 x OCuLink SFF-8612 female to Key M male Adapter

1 x Oculink SFF-8611 cable.

1 x OCuLink SFF-8612 female to PCI-E 16x Adapter


System requirements

Linux Kernel 4.3 or above

Windows 8.1/8.1-64/10/10-64

SFF-8611 Oculink Female SFF-8612 to U.2 U.3 SFF-8639 NVME PCIe PCI-Express SSD Adapter for Mainboard

This convertor expands the SFF-8639 U.2/U.3 by one SFF-8612 oculink interface. It can be connected e.g. one SSD by using an optional cable.

The card transmits PCI Express 4.0/5.0 signals using the NVMe protocol.

Connectors: 1 x OCuLink SFF-8612 female and 1 x SFF-8639 U.2/U.3 female and 1 x SATA power.

Data transfer rate up to 64Gbps, Supports NVM Express (NVMe) 1.2.

The vertical connector allowing you to connect it to a female port, even if space around the port is limited.

The speed and other properties is not changed,only form conversion interface.Transparent to the operating system and does not require any software drivers.

U.3 drives are still backward compatible with U.2, though—the U.3 drives determine which host type it is inserted into (by using different combinations of HPT0 and HTP1 being open or ground), and configure the data lanes on power-up. U.3 drives can still act as dual-port NVMe drives in supporting systems.

2230 PCI-E4.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Vertical Host Adapter for NVME U.2 SSD eGPU

This convertor expands the 2230 M-Key system by one SFF-8612 oculink interface.

It can be connected e.g. one SSD or eGPU Graphics Card by using an optional cable.

The card transmits PCI Express 4.0 signals using the NVMe protocol.

Connectors: 1 x OCuLink SFF-8612 female and 1 x 67 pin M.2 Key M male.

Data transfer rate up to 64Gbps, Supports NVM Express (NVMe) 1.2.

The angled type vertical connector Allowing you to connect it to a female port, even if space around the port is limited.

PCI-E 3.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Host Adapter for PCIe Nvme SSD

This convertor expands the system by one SFF-8612 interface.

It can be connected e.g. one SSD by using an optional cable.

The card transmits PCI Express signals using the NVMe protocol.


Specification

Connectors:

1 x OCuLink SFF-8612 female

1 x 67 pin M.2 Key M male

Data transfer rate up to 32 Gbps

Bootable, ex UEFI version 2.3.1

Supports NVM Express (NVMe) 1.2


System requirements

Linux Kernel 4.3 or above

Windows 8.1/8.1-64/10/10-64

A free M.2 interface with key M

PCI-E Slim Line SAS 4.0 SFF-8654 4i 38pin Host to SFF-8654 Slim SAS Target Cable 50cm

This SAS cable can be used to connect internal devices, e.g. a backplane with Slim Line SAS connector to a controller with Slim SAS SFF-8654 4i connector.

Ultraport SlimSAS 4i 38Pos Cable Assembly

Slim SAS 4i Straight to Slim Line SAS

Length: 50cm

Connector 1: Slim SAS 4i 38pin

Connector 2: Slim SAS 4i 38pin

Applications for Servers,Data Storage,Workstation

Meet PCIe Gen3 and SAS4.0 specification

Features and Benefits:

1.Smaller size connector and cable saves device space

2.Provide four channels signal transmission as per industry standard

3.Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel

4.Meet SAS4.0, Ultraport SlimSAS SFF-8654 specification

MCIO 4x Mini Cool Edge IO to U.2 SFF-8639 NVME PCIe PCI-Express Cable for Mainboard SSD

Hyper Kit Storage controller cable,Ultra M.2 Card cable for Mainboard Intel SSD 750 M.2 and MCIO 4x

Support PCIe 5.0/4.0/3.0 x4

Length 50cm, Cable only, the adapter card not included.

This cable expands the system by one MCIO interface. It can be connected e.g. one SSD by using an optional adapter.

The cable transmits PCI Express signals using the 4x pcie protocol.

What is mini cool edge Io (MCIO): MCIO cables are designed for data center, networking and telecommunications markets that use SAS, PCIe, Ethernet and othersignal protocols.

The solution can support cable to board and card to board applications in system, which include chip to chip, chiptomodule, chip to board and card edge option.

High-performance cable for networking and server equipment: The MCIO Mini Cool Edge IO is designed to support a wide range of protocols, including SAS, PCIe, Ethernet, and more, ensuring optimal performance for your equipment.

Industry standards: Support for SAS 3.0/4.0, PCIe Gen 3/4/5, 25G Ethernet, and 56GT/s PAM4 means that you can trust that your equipment will perform at optimal levels without any signal loss or degradation.

PCI-Express 5.0 4.0 4X to MCIO Mini Cool Edge IO Female Host Adapter for PCIe Nvme U.2 SSD

This convertor expands the system by one MCIO interface. It can be connected e.g. one SSD by using an optional cable.

The card transmits PCI Express signals using the 4x pcie protocol.

What is mini cool edge Io (MCIO): MCIO cables are designed for data center, networking and telecommunications markets that use SAS, PCIe, Ethernet and othersignal protocols.

The solution can support cable to board and card to board applications in system, which include chip to chip, chiptomodule, chip to board and card edge option.

High-performance cable for networking and server equipment: The MCIO Mini Cool Edge IO is designed to support a wide range of protocols, including SAS, PCIe, Ethernet, and more, ensuring optimal performance for your equipment.

Industry standards: Support for SAS 3.0/4.0, PCIe Gen 3/4/5, 25G Ethernet, and 56GT/s PAM4 means that you can trust that your equipment will perform at optimal levels without any signal loss or degradation.

Specification

Connectors:

1 x MCIO female

1 x pci-e 4x male

Data transfer rate up to 64 Gbps

Bootable, ex UEFI version 2.3.1

Supports NVM Express (NVMe) 1.2


System requirements

Linux Kernel 4.3 or above

Windows 8.1/8.1-64/10/10-64

A free pci-e interface with 4x/8x/16x

PCI-E 5.0 4.0 M.2 M-key to MCIO Mini Cool Edge IO Female Host Adapter for PCIe Nvme SSD 2280

This convertor expands the system by one MCIO interface. It can be connected e.g. one SSD by using an optional cable.

The card transmits PCI Express signals using the NVMe protocol.

What is mini cool edge Io (MCIO): MCIO cables are designed for data center, networking and telecommunications markets that use SAS, PCIe, Ethernet and othersignal protocols.

The solution can support cable to board and card to board applications in system, which include chip to chip, chiptomodule, chip to board and card edge option.

High-performance cable for networking and server equipment: The MCIO Mini Cool Edge IO is designed to support a wide range of protocols, including SAS, PCIe, Ethernet, and more, ensuring optimal performance for your equipment.

Industry standards: Support for SAS 3.0/4.0, PCIe Gen 3/4/5, 25G Ethernet, and 56GT/s PAM4 means that you can trust that your equipment will perform at optimal levels without any signal loss or degradation.

Specification

Connectors:

1 x MCIO female

1 x 67 pin M.2 Key M male

Data transfer rate up to 64 Gbps

Bootable, ex UEFI version 2.3.1

Supports NVM Express (NVMe) 1.2


System requirements

Linux Kernel 4.3 or above

Windows 8.1/8.1-64/10/10-64

A free M.2 interface with key M

Oculink PCIe PCI-Express SFF-8611 8i to SFF-8654 8i 8x Slimline SSD Data Active Cable 50cm

This OCuLink 8x cable can be used to connect internal devices, e.g. a backplane with SFF-8654 connector to a controller with OCuLink SFF-8611 connector.

Also can work for a backplane with SFF-8611 socket to a controller with SFF-8654 socket.

OCuLink SFF-8611 male to SFF-8654 male,Lock to Mating Part: With Active Latch.

Data transfer rate up to 16Gbps,Cable length: 50cm.

System requirements: A free OCuLink 8x 80pin interface.

Oculink PCIe PCI-Express SFF-8611 4i to SFF-8087 36Pin PCIE Slimline SSD Data Active Cable 50cm

This OCuLink cable can be used to connect internal devices, e.g. a backplane with SFF-8087 PCIE connector to a controller with OCuLink SFF-8611 connector.

The cable only work for PCI-E, not work for SAS. OCuLink SFF-8611 male to SFF-8087 male

Lock to Mating Part: With Active Latch for SFF-8611 oculink.

Data transfer rate up to 12Gbps,Cable length: 50cm

System requirements: A free OCuLink interface

Slimline SAS 4.0 SFF-8654 4i 38pin Host to 4 SAS 29pin SFF-8482 Target Hard Disk Fanout Raid Cable

This SAS cable can be used to connect internal devices, e.g. a hard disk with SAS 29pin connector to a controller with Slim SAS SFF-8654 4i connector.

Ultraport SlimSAS 4i 38Pos Cable Assembly

Slim SAS 4i Straight to SAS 29pin

Length: 100cm

Connector 1: Slim SAS 4i 38pin

Connector 2: SATS 29pin

Applications for Servers,Data Storage,Workstation.Meet SAS3.0/4.0 specification

The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.

The SFF-8482 is a 29-pin connector with a plastic body, and configured with 15 pins that support the power requirements of the drive, and (2) groups of 7 pins that carry the SAS data signals.

The SFF-8482 supports 2 SAS ports (lanes) to/from the drive.

Features and Benefits:

1.Smaller size connector and cable saves device space

2.Provide four channels signal transmission as per industry standard

3.Data speed: 24Gbps for SAS per channel

4.Meet SAS3.0/4.0, Ultraport SlimSAS SFF-8654 specification

8x Oculink SFF-8612 SFF-8611 to PCIE PCI-Express 16x Adapter with ATX 24pin Power Port for Mainboard Graphics Card

Oculink 8x connectors are internal and external small form factor PCI-E connectors and cables optimized for the client and market.

This oculink pci-e converter enables belowing applications.

One PCIE PCI-Express 16x 4x device can be connected,The converter can be installed into the system internally through the SFF-8611/8612 oculink 8x interface.

The converter support all standard PCI-E 16x 8x 4x card, like USB,LAN,1394,Audio,Graphics Card.

The atx power port support 12V power. Please connect the extral power for your PCI-E card if the power is insufficient. (The switch is for ATX power)

4x Oculink SFF-8612 SFF-8611 to PCIE PCI-Express 16x Adapter with ATX 24pin Power Port for Mainboard Graphics Card

Oculink 4x connectors are internal and external small form factor PCI-E connectors and cables optimized for the client and market.

This oculink pci-e converter enables belowing applications.

One PCIE PCI-Express 16x 4x device can be connected,The converter can be installed into the system internally through the SFF-8611/8612 oculink interface.

The converter support all standard PCI-E 16x 8x 4x card, like USB,LAN,1394,Audio,Graphics Card.

The atx power port support 12V power. Please connect the extral power for your PCI-E card if the power is insufficient. (The switch is for ATX power)

PCI-E Ultraport Slimline SAS Slim 4.0 SFF-8654 8i 74pin to Dual SFF-8643 4i Mini SAS HD Cable PCI-Express

This cable can be used to connect internal devices, e.g. a backplane with Slim Line 8654 74pin connector to a controller with SFF-8643 connector.

Ultraport Slimline 8i 74Pos Cable Assembly

Length: 50cm

Connector 1: Slimline SFF-8654 8i 74pin

Connector 2: Dual SFF-8643 Mini SAS HD

Applications for Servers,Data Storage,Workstation

Meet PCIe Gen3/4 and SAS4.0 specification

Features and Benefits:

1.Smaller size connector and cable saves device space

2.Provide four channels signal transmission as per industry standard

3.Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel

4.Meet SAS4.0, Ultraport SlimSAS SFF-8654 specification

PCI-E Ultraport Slimline SAS Slim 4.0 SFF-8654 8i 74pin to Dual SFF-8087 Mini SAS Cable PCI-Express

This cable can be used to connect internal devices, e.g. a backplane with Slim Line 8654 74pin connector to a controller with SFF-8087 connector.

Ultraport Slimline 8i 74Pos Cable Assembly

Length: 50cm

Connector 1: Slimline SFF-8654 8i 74pin

Connector 2: Dual SFF-8087 Mini SAS

Applications for Servers,Data Storage,Workstation

Meet PCIe Gen3/4 and SAS4.0 specification

Features and Benefits:

1.Smaller size connector and cable saves device space

2.Provide four channels signal transmission as per industry standard

3.Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel

4.Meet SAS4.0, Ultraport SlimSAS SFF-8654 specification

PCI-E Slimline SAS Slim 4.0 SFF-8654 8i 74pin to Dual Oculink SFF-8611 Cable 50cm PCI-Express

This cable can be used to connect internal devices, e.g. a backplane with Slim Line 8654 74pin connector to a controller with oculink SFF-8611 connector.

Ultraport Slimline 8i 74Pos Cable Assembly

Length: 50cm

Connector 1: Slimline SFF-8654 8i 74pin

Connector 2: Dual SFF-8611 oculink

Applications for Servers,Data Storage,Workstation

Meet PCIe Gen3/4 and SAS4.0 specification

Features and Benefits:

1.Smaller size connector and cable saves device space

2.Provide four channels signal transmission as per industry standard

3.Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel

4.Meet SAS4.0, Ultraport SlimSAS SFF-8654 specification

PCI-E Slimline SAS 4.0 SFF-8654 8i 74pin to SFF-8654 74pin Male to Female Extender Adapter Angled Test Tools

This adapter can be used to connect internal devices, e.g. a backplane with Slim Line SAS connector to a controller with Slim SAS SFF-8654 8i connector.

Ultraport SlimSAS 8i 74Pos Assembly

Connector 1: Slim SAS 8i 74pin Male

Connector 2: Slim SAS 8i 74pin Female

Applications for Servers,Data Storage,Workstation

Meet PCIe Gen3 and SAS4.0 specification

Features and Benefits:

1.Smaller size connector and cable saves device space

2.Provide four channels signal transmission as per industry standard

3.Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel

4.Meet SAS4.0, Ultraport SlimSAS SFF-8654 specification

PCI-E Slim Line SAS 4.0 SFF-8654 8i 74pin Host to SFF-8654 Slim SAS Target Cable 50cm

This SAS cable can be used to connect internal devices, e.g. a backplane with Slim Line SAS connector to a controller with Slim SAS SFF-8654 8i 74pin connector.

Ultraport SlimSAS 4i 74Pos Cable Assembly

Slim SAS 8i Straight to Slim Line SAS

Length: 50cm

Connector 1: Slim SAS 8i 74pin

Connector 2: Slim SAS 8i 74pin

Applications for Servers,Data Storage,Workstation

Meet PCIe Gen3 and SAS4.0 specification

Features and Benefits:

1.Smaller size connector and cable saves device space

2.Provide four channels signal transmission as per industry standard

3.Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel

4.Meet SAS4.0, Ultraport SlimSAS SFF-8654 specification

PCI-Express 4.0 Slimline SAS SFF-8654 to Oculink SFF-8611 SFF-8612 PCBA Female Adapter With Bracket

The Adapter with Full and Low Profile PCI Slot Profile Mounting Bracket

The Adapter External will work both on the host and device side. it is reversible design.

The adapter support SAS to SAS or PCI-E to PCI-E singal.

Supports up to 12Gb/s Mini SAS or PCI-E 4.0 Data Transfer Rate.

PCI-Express 4.0 Slimline SAS SFF-8654 to Mini SAS SFF-8087 PCBA Female Adapter With Bracket

The Adapter with Full and Low Profile PCI Slot Profile Mounting Bracket

The Adapter External will work both on the host and device side. it is reversible design.

The adapter support SAS to SAS or PCI-E to PCI-E singal.

Supports up to 12Gb/s Mini SAS or PCI-E 4.0 Data Transfer Rate.

PCI-Express 4.0 Slimline SAS SFF-8654 to HD SFF-8643 PCBA Female Adapter With Bracket

The Adapter with Full and Low Profile PCI Slot Profile Mounting Bracket

The Adapter External will work both on the host and device side. it is reversible design.

The adapter support SAS to SAS or PCI-E to PCI-E singal.

Supports up to 12Gb/s Mini SAS or PCI-E 4.0 Data Transfer Rate.

PCI-Express 4.0 Mini SAS SFF-8087 to Oculink SFF-8611 SFF-8612 PCBA Female Adapter With Bracket

The Adapter with Full and Low Profile PCI Slot Profile Mounting Bracket

The Adapter External will work both on the host and device side. it is reversible design.

The adapter support SAS to SAS or PCI-E to PCI-E singal.

Supports up to 12Gb/s Mini SAS or PCI-E 4.0 Data Transfer Rate.

PCI-Express 4.0 Mini SAS HD SFF-8643 to Oculink SFF-8611 SFF-8612 PCBA Female Adapter With Bracket

The Adapter with Full and Low Profile PCI Slot Profile Mounting Bracket

The Adapter External will work both on the host and device side. it is reversible design.

The adapter support SAS to SAS or PCI-E to PCI-E singal.

Supports up to 12Gb/s Mini SAS or PCI-E 4.0 Data Transfer Rate.

Oculink SFF-8612 SFF-8611 to PCIE PCI-Express 16x 4x Adapter with SATA Power Port for Mainboard

Oculink 4x connectors are internal and external small form factor PCI-E connectors and cables optimized for the client and market.

This oculink pci-e converter enables belowing applications.

One PCIE PCI-Express 16x 4x device can be connected,The converter can be installed into the system internally through the SFF-8611/8612 oculink interface.

The converter support all standard PCI-E 16x 8x 4x card, like USB,LAN,1394,Audio,Graphics Card.

The SATA power port only support 12V 2A power max. Please connect the extral power for your PCI-E card if the power is insufficient.

OCuLink PCIe PCI-Express SFF-8611 8x 8-Lane to OCuLink SFF-8611 8x SSD Data Active Cable 50cm

This OCuLink 8x cable can be used to connect internal devices, e.g. a backplane with OCuLink SFF-8611 connector to a controller with OCuLink SFF-8611 8x connector.

OCuLink SFF-8611 8x 80pin male to OCuLink SFF-8611 8x 80pin male

Lock to Mating Part: With Active Latch

Data transfer rate up to 16Gbps

Cable length: 50cm

System requirements: A free OCuLink 8x 80pin interface

OCuLink PCIe PCI-Express SFF-8611 8x 8-Lane to Dual SFF-8654 Slimline 4x SSD Data Active Cable 50cm

This OCuLink 8x cable can be used to connect internal devices, e.g. a backplane with SFF-8654 connector to a controller with OCuLink SFF-8611 8x connector.

OCuLink SFF-8611 8x 80pin male to dual SFF-8654 male

Lock to Mating Part: With Active Latch

Data transfer rate up to 16Gbps

Cable length: 50cm

System requirements: A free OCuLink 8x 80pin interface

OCuLink PCIe PCI-Express SFF-8611 8x 8-Lane to Dual SFF-8643 HD 4x SSD Data Active Cable 50cm

This OCuLink 8x cable can be used to connect internal devices, e.g. a backplane with SFF-8643 connector to a controller with OCuLink SFF-8611 8x connector.

OCuLink SFF-8611 8x 80pin male to dual SFF-8643 4x 36pin male

Lock to Mating Part: With Active Latch

Data transfer rate up to 16Gbps

Cable length: 50cm

System requirements: A free OCuLink 8x 80pin interface

OCuLink PCIe PCI-Express SFF-8611 8x 8-Lane to Dual SFF-8639 U.2 4x SSD Data Active Cable 50cm

This OCuLink 8x cable can be used to connect internal devices, e.g. a backplane with SFF-8639 connector to a controller with OCuLink SFF-8611 8x connector.

OCuLink SFF-8611 8x 80pin male to dual SFF-8639 U.2 male

Lock to Mating Part: With Active Latch

Data transfer rate up to 16Gbps

Cable length: 50cm

System requirements: A free OCuLink 8x 80pin interface

OCuLink PCIe PCI-Express SFF-8611 8x 8-Lane to Dual SFF-8611 Oculink 4x SSD Data Active Cable 50cm

This OCuLink 8x cable can be used to connect internal devices, e.g. a backplane with SFF-8611 4x connector to a controller with OCuLink SFF-8611 8x connector.

OCuLink SFF-8611 8x 80pin male to dual SFF-8611 4x male

Lock to Mating Part: With Active Latch

Data transfer rate up to 16Gbps

Cable length: 50cm

System requirements: A free OCuLink 8x 80pin interface

OCuLink PCIe PCI-Express SFF-8611 8x 8-Lane to Dual SFF-8087 4x SSD Data Active Cable 50cm

This OCuLink 8x cable can be used to connect internal devices, e.g. a backplane with SFF-8087 connector to a controller with OCuLink SFF-8611 8x connector.

OCuLink SFF-8611 8x 80pin male to dual SFF-8087 4x 36pin male

Lock to Mating Part: With Active Latch

Data transfer rate up to 16Gbps

Cable length: 50cm

System requirements: A free OCuLink 8x 80pin interface

OcuLink PCIe PCI-Express SFF-8611 4i to SFF-8654 Slimline SSD Data Active Cable 50cm

This OCuLink cable can be used to connect internal devices, e.g. a backplane with SFF-8654 connector to a controller with OCuLink SFF-8611 connector.

OCuLink SFF-8611 male to SFF-8654 male

Lock to Mating Part: With Active Latch

Data transfer rate up to 8Gbps

Cable length: 50cm

System requirements:A free OCuLink interface

PCI-E 3.0 4.0 to SFF-8654 Slimline SAS Card Adapter and U.2 U2 SFF-8639 NVME PCIe SSD Cable for Mainboard SSD

The package included one card and one 50cm cable.

for Mainboard and U.2 SSD 750 PCI-E SFF-8654 interface

Not work for SAS or SATA disk.

Hyper Kit Storage controller,Ultra PCI-E Card

Support 4x PCIe 3.0 and PCIe 4.0

Support Windows 10 or Later.

U.2 SFF-8639 Cable PCI-E 3.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Host Adapter for PCIe Nvme SSD 2260

The package included one cable and ine adapter.

This convertor expands the system by one SFF-8612 interface.

It can be connected e.g. one SSD by using an optional cable.

The card transmits PCI Express signals using the NVMe protocol.


Specification

Connectors:

1 x OCuLink SFF-8612 female

1 x 67 pin M.2 Key M male

1 x SFF-8639 U.2 male

Data transfer rate up to 32 Gbps

Bootable, ex UEFI version 2.3.1

Supports NVM Express (NVMe) 1.2


System requirements

Linux Kernel 4.3 or above

Windows 8.1/8.1-64/10/10-64

A free M.2 interface with key M

OCuLink PCIe SFF-8611 4i to OCuLink SFF-8643 SSD Data Active Cable 50 cm

This OCuLink cable can be used to connect internal devices, e.g. a backplane with SFF-8643 connector to a controller with OCuLink SFF-8611 connector.

OCuLink SFF-8611 male to SFF-8643 male

Lock to Mating Part: With Active Latch

Data transfer rate up to 8 Gbps

Cable length: 50cm

System requirements:A free OCuLink interface

The Cable can't work for SFF-8643 slimline SAS raid card.

NGFF M-Key NVME to SFF-8654 Slimline SAS Card Adapter and U.2 U2 SFF-8639 NVME PCIe SSD Cable for Mainboard SSD

The package included one card and one 50cm cable.

for Mainboard NGFF M-Key NVME and U.2 SSD 750 PCI-E SFF-8654 interface

Not work for SAS or SATA disk.

Hyper Kit Storage controller,Ultra PCI-E NGFF M-Key NVME Card

Support 4x PCIe 3.0 and PCIe 4.0

Support Windows 10 or Later.

PCI-E Slimline SAS 4.0 SFF-8654 4i 38pin to SFF-8654 38pin Male to Female Extender Adapter Test Tools

This adapter can be used to connect internal devices, e.g. a backplane with Slim Line SAS connector to a controller with Slim SAS SFF-8654 4i connector.

Ultraport SlimSAS 4i 38Pos Assembly

Connector 1: Slim SAS 4i 38pin Male

Connector 2: Slim SAS 4i 38pin Female

Applications for Servers,Data Storage,Workstation

Meet PCIe Gen3 and SAS4.0 specification

Features and Benefits:

1.Smaller size connector and cable saves device space

2.Provide four channels signal transmission as per industry standard

3.Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel

4.Meet SAS4.0, Ultraport SlimSAS SFF-8654 specification

PCI-E 4X to U.2 U2 Kit SFF-8639 to SFF-8654 Slimline SAS NVME PCIe SSD Adapter for Mainboard

for Mainboard Intel SSD 750 M.2 SFF-8654 Slimeline SAS HD

Hyper Kit Storage controller,Ultra PCI-E Card (PCIe 3.0 x4)

The card only work for PCI-E SSD.(Not work for SAS or Slimeline SAS HD)

Package included the PCI-E card+standard bracket.